Speco Technologies DVR-16/IP Manuel d'utilisateur télécharger pdf (Page 7)

3. Quick Installation Guide

The DVR-16/IP is equipped with a mobile rack, the HDD is hot-swappable. You can exchange

the HDD when the HDD is full. The following figures illustrate how to install HDD into the

removable cartridge.

Step1: Pull the active-handle outwards and unlock with the

miniature key provided (Figure 1).

Step2: Pull the handle outwards till the carrier body is out of the

cartridge (Figure 1).

Step3: Push the release latch to slide the top cover backwards

and remove it (Figure 1).

Step4: Insert the DC power cable and IDE cable on the HDD.

Make sure the HDD is set to “Master” (Figure 2).

Step5: Position the HDD into carrier body and slide the top

cover back to secure. Secure the HDD using the screws

provided (Figure 3).

Step6: Slide the carrier body back in the cartridge frame and

lock it with the key provided. Then push the active-handle

inwards (Figure 4).

1 2 3 4 5 6 7 8 9 10 11 12 ... 45 46

Pas de commentaire

Speco Technologies DVR-16/IP Manuel d'utilisateur Page 7