Speco Technologies D16RS Manuel d'utilisateur télécharger pdf (Page 24)

RESOLUTION

Select D1, Half D1 or CIF using the mouse or the control button on the

remote control.

FRAME RATE

Set the frame rate for the specified channel. The sum of the frame rate

values from each channel cannot exceed the maximum frame rates for a

specific recording resolution.

QUALITY

Select the recording quality for the selected channel. Options are;

Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)

RECORDING

MODE

Assign the recording mode for the selected channel. Options are:

Continuous, Motion, Schedule or Disable.

SENSOR

RECORDING

Select the sensor setting for the selected channel.

(D4RS does not support SENSOR RECORDING.)

PRE RECORD

Enable/disable pre-event recording. Pre-event recording time is up to 20

minutes.

POST EVENT

RECORD

Set the post event recording time duration for the specified channel.

(10~30 seconds)

AUDIO

Enable/disable audio recording for the specified channel.

SCHEDULE

Set the recording schedule.

EZRECORD

Set the recording by EZRecord feature.

The EZRECORD has high priority than other setting values on RECORD.

User can change the setting value such as resolution, frame rate, quality

and recording type. By the setting value, the DAYS TO RECORD will change

accordingly.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 93 94

Pas de commentaire

Speco Technologies D16RS Manuel d'utilisateur Page 24