Speco Technologies DVR-PC16 Series Manuel d'utilisateur télécharger pdf (Page 51)

6.4.5. Add PTZ Protocol

To install new camera protocol, select “Add PTZ Protocol”

Port

Select the port to install PTZ protocol. Selectable port appears when arrow

button is pressed.

6.4.6. Current View

Show the current viewing screen of the chosen camera. See this screen to

control the location of selected camera.

6.4.7. Camera Address

Click on the keyboard to input the suitable controller number according to the

controller type. Maximum of 255 numbers can be set for controller number.

The controller number in the actual controller should correspond with the

selected camera number.

To operate camera control functions,

1. Set the type of camera protocol.

2. Select the desired camera to control.

3. Select Enable PTZ.

4. Input the Camera Address using the keyboard icon.

5. Control the camera location by using Pan/Tilt buttons.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 77 78

Pas de commentaire

Speco Technologies DVR-PC16 Series Manuel d'utilisateur Page 51