Speco Technologies CVC5815DNV Manuel d'instructions télécharger pdf (Page 21)

- 20 -

* OFF: BLC function does not operate.

* BLC: Select LOW/MID/HIGH

User can select and define a specific area in scene and view the area clearly.

Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.

Press the "ENTER" button again after area setting, you can change the area like a picture 2.

Default: Press the Default to return to factory defaults.

* RETURN:

Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.

NOTE

* Pressing the SET button in AUTO mode allows adjustment of image brightness

by increasing or decreasing the shutter speed (x2 ~x256).

* The higher the level, the brighter the image becomes, but it is possible that an

after image (ghosting) could appear.

* When SENS-UP is activated the increased magnification can induce noise and

pixelation; this is quite normal.

Back Light(BLC)

This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome

even strong backlight conditions.

BLC

GAIN

AREA

DEFAULT

RETURN

MIDDLE

RET

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Pas de commentaire

Speco Technologies CVC5815DNV Manuel d'instructions Page 21