Speco Technologies Intensifier3 Manuel d'utilisateur télécharger pdf (Page 17)

◆

AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen

- but the higher the noise.

* OFF : Deactivates the AGC function.

* LOW : Allows automatic gain control from 5.3dB to 32dB.

* HIGH : Allows automatic gain control from 5.3dB to 37dB.

◆

INTENSIFY : When it is night or dark, the camera automatically detects the

light level and maintains a clear picture if this mode is activated.

* OFF : Deactivates the INTENSIFY function.

* AUTO : Activates the INTENSIFY function.

◆

RETURN : Select this to save the changes in the EXPOSURE menu and return

to the SETUP menu.

☞

NOTE

■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by

increasing or decreasing the shutter speed. (x2 ~ x512)

■ Note that the higher the zoom level, the brighter the screen, but the more likely there

will be a ghosting effect.

■ It is normal for Noise, Spots and Whitish symptoms to appear in INTENSIFY mode

when the D-ZOOM level is increased.

●

White Balance (White Bal) Setting

Use the White Balance function to adjust the screen color.

1. When the SETUP menu screen is displayed, select 'White Bal' by using the

Function Setup switch so that the arrow indicates 'White Bal'.

2. Select a desired mode using the Function Setup switch.

MAIN SETUP

1.LENS

2.EXPOSURE

3.WHITE BAL

ATW

☞

NOTE

■ When the SHUTTER is set to MANUAL or A.FLK mode, INTENSIFY will be disabled.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Pas de commentaire

Speco Technologies Intensifier3 Manuel d'utilisateur Page 17